Contents Checklist
Please check the box contents after unpacking. If any components are missing, please contact the dealer.
| Name | Quantity |
| M11 Pay Tablet | 1 |
| AC Power Adapter | 1 |
| USB Cable | 1 |
| Product Manual | 1 |
Product Description
Front & Back View:
Installation
SIM card:
1. Move the battery cover safety lock to the right unlocking position;
2. Pull out the battery cover from the battery cover pull-out position;
3. Remove the battery
4. Push the SIM/SD card slot to the left using a card pick-up needle or your fingernail.
5. Insert SIM card into the card-slot.
microSD card:
1. Move the battery cover safety lock to the right unlocking position;
2. Pull out the battery cover from the battery cover pull-out position;
3. Remove the battery
4. Push the SIM/SD card slot to the left using a card pick-up needle or your fingernail.
5. Insert microSD card into the card-slot.
Instructions
Power On/Off
Power on: Press and hold the Power button for five seconds until the LCD besides, and then the terminal is being turned on.
Power off: Press and hold the Power button for one second until the shutdown menu appears, tap Shutdown > Click Shutdown, and then “Shutting…” appears, the terminal is being turned off.
Magnetic Stripe Card
Place the magnetic strip end of the magnetic card toward the device and swipe the card smoothly in the magnetic reader slot.
IC Card
Place the chip face up, insert the IC card into the IC card slot, and push it to the end.
Contactless Card
Place a contactless card close to the sensor area of swiping which is at the front or back of the terminal.
NFC
Place the NFC terminal/card above the sensor area.
General Usage Tips
a) Avoid placing this product in direct sunlight for extended periods, nor in environments with excessively high temperature, moisture or dust.
b) Only qualified personnel should repair this product.
c) Before using cards in the chip reader, please ensure it is free from any foreign objects.
Working environment:
Temperature range:-10℃ ~ 50℃ (14℉~122℉); Humidity range 10℅ ~ 93℅(non-condensation)
Storage environment:
Temperature range:-20℃ ~ 70℃ (-4℉~158℉); Humidity range 10℅ ~ 93℅ (non-condensation)
Important Safety Warning
1) Do not place the terminal/battery under direct sunlight, high temperature, smoke, dust, and damp environment.
2) Do not modify the battery and avoid inserting foreign objects into the battery compartment. External shock and pressure may cause battery liquid leak, overheat, fire or explosion. Please keep battery away from children and animals to avoid injury or explosion.
3) Stop using the battery immediately and replace with a new one if the battery expands, is bent, damaged, or overheated.
4) It is recommended to only use the equipped PAX power adaptor or use a third-party power adaptor whose specifications match the device equipped power adaptor and meets the country/local region regulations and international and regional safety standards. Non-compatible power supply, charger or battery may cause fire, explosion and other dangers.
5) Battery charging time can not be more than 24 hours. Please charge the battery when the battery level is too low. If the battery is not being used for a long time to avoid battery over charge and discharge damage, please charge the battery once every six months.
6) Recommend replacing the battery after two-years continuous use.
7) Please dispose of the device, battery, and its accessories according to the local regulations. They cannot be disposed as household waste. Improper disposal of the battery may cause battery explosion.
Compliance Statements
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC SAR statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
ISED 5G Wi-Fi statement
The user manual for LE-LAN devices shall contain instructions related to the restrictions mentioned in the above sections, namely that:
- the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
- where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.
- le dispositif utilisé dans la bande 5150-5250 MHz est réservé à une utilisation en intérieur afin de réduire le risque de brouillage préjudiciable aux systèmes mobiles par satellite dans le même canal;
- le cas échéant, le (s) type (s) d’antenne, le (s) modèle (s) d’antenne et l’angle (s) d’inclinaison le plus défavorable nécessaire (s) pour rester conforme (e) au p.e. L’exigence relative au masque d’élévation énoncée à la section 6.2.2.3 doit être clairement indiquée.
IC SAR statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. L’utilisateur final doit suivre les instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur.
Le dispositif portatif est conçu pour répondre aux exigences d’exposition aux ondes radio établie par le développement énergétique DURABLE. Ces exigences un SAR limite de 1,6 W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser lorsqu’il est correctement porté sur le corps.
